Technical information

thermaRock-WR pipe insulation
&
THERMALock ASJ FIBERGLASS pipe insulation

  • ThermaRock WR Pre-Formed Pipe Insulation has been tested by independent SCC-accredited labs.

    • ASTM C547: Standard Specification for Mineral Fiber Pipe Insulation

    • ASTM C335 / C177: Steady State Heat Transfer Properties of Horizontal Pipe Insulation

    • ASTM C356: Linear Shrinkage of Preformed High Temperature Insulation Subject to Soaking Heat

    • ASTM C411: Hot-Surface Performance of High Temperature Thermal Insulation.

    • ASTM C447: Maximum Use Temperature of Insulations.

    • ASTM C1045: Thermal Transmission Properties from Steady-State Heat Flux.

  • ThermaRock WR Pre-Formed Pipe Insulation has been tested by independent SCC-accredited labs.

    • ASTM C795 / C871: Thermal Insulation for Use in Contact with Stainless Steels.

    • ASTM C692: Influence of Thermal Insulation on External Stress Corrosion Cracking.

    • ASTM C1104:‍ ‍Water Vapor Sorption by Unfaced Mineral Fiber.

    • ASTM C1617: Evaluation of Accelerated Corrosion of Extracted Solutions Containing Leachable Ions on Aqueous Corrosion of Metals.

  • ThermaRock WR Pre-Formed Pipe Insulation has been tested by independent SCC-accredited labs.

    • CAN/ULC S102: Standard Method of Test for Surface Burning Characteristics of Building Materials.

    • UL 723: Standard Test for Surface Burning Characteristics of Materials.

Technical information

thermawrap-WR flexible pipe & EQUIPMENT INSULATION

  • ThermaRock WR Flexible Pipe Wrap Insulation has been tested by independent SCC-accredited labs.

    • ASTM C553: Standard Specification for Mineral Fiber Blanket Thermal Insulation

    • ASTM C177: Steady State Heat Transfer Properties of Horizontal Pipe Insulation

    • ASTM C411: Hot-Surface Performance of High Temperature Thermal Insulation.

    • ASTM C447: Maximum Use Temperature of Insulations.

    • ASTM C1045: Thermal Transmission Properties from Steady-State Heat Flux.

    • ASTM C1101: Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation.

  • ThermaRock WR Flexible Pipe Wrap Insulation has been tested by independent SCC-accredited labs.

    • ASTM C795 / C871: Thermal Insulation for Use in Contact with Stainless Steels.

    • ASTM C692: Influence of Thermal Insulation on External Stress Corrosion Cracking.

    • ASTM C1104:‍ ‍Water Vapor Sorption by Unfaced Mineral Fiber.

    • ASTM C1617: Evaluation of Accelerated Corrosion of Extracted Solutions Containing Leachable Ions on Aqueous Corrosion of Metals.

  • ThermaRock WR Flexible Pipe Wrap Insulation has been tested by independent SCC-accredited labs.

    • CAN/ULC S102: Standard Method of Test for Surface Burning Characteristics of Building Materials.

    • UL 723: Standard Test for Surface Burning Characteristics of Materials.

Technical information

thermaslab-WR semi-rigiD VESSEL & TANK INSULATION

  • ThermaRock WR Flexible Pipe Wrap Insulation has been tested by independent SCC-accredited labs.

    • ASTM C612: Mineral Fiber Block and Board Insulation.

    • ASTM C177: Steady State Heat Transfer Properties of Horizontal Pipe Insulation.

    • ASTM C356: Linear Shrinkage of Pre-Formed High Temperature Insulation.

    • ASTM C411: Hot-Surface Performance of High Temperature Thermal Insulation.

    • ASTM C447: Maximum Use Temperature of Insulations.

    • ASTM C1045: Thermal Transmission Properties from Steady-State Heat Flux.

    • ASTM C1101: Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation.

  • ThermaRock WR Flexible Pipe Wrap Insulation has been tested by independent SCC-accredited labs.

    • ASTM C795 / C871: Thermal Insulation for Use in Contact with Stainless Steels.

    • ASTM C692: Influence of Thermal Insulation on External Stress Corrosion Cracking.

    • ASTM C1104:‍ ‍Water Vapor Sorption by Unfaced Mineral Fiber.

    • ASTM C1617: Evaluation of Accelerated Corrosion of Extracted Solutions Containing Leachable Ions on Aqueous Corrosion of Metals.

  • ThermaRock WR Flexible Pipe Wrap Insulation has been tested by independent SCC-accredited labs.

    • CAN/ULC S102: Standard Method of Test for Surface Burning Characteristics of Building Materials.

    • UL 723: Standard Test for Surface Burning Characteristics of Materials.

technical data sheets

THERMAROCK-WR MANDREL WOUND PIPE INSULATION (MINERAL WOOL)

THERMALOCK MANDREL WOUND FIBERGLASS PIPE INSULATION (WITH ASJ FACING)

THERMAWRAP-WR FLEXIBLE BLANKET INSULATION (MINERAL WOOL)

THERMASLAB-WR SEMI-RIGID TANK & VESSEL INSULATION (MINERAL WOOL)

THERMABLOCK-WR RIGID BOARD INSULATION (MINERAL WOOL) (TO BE PUBLISHED; CONTACT FOR INFO)